Europe accounted for approximately 12% of global plastics production in 2024, down from 22% in 2006, according to Plastics Europe’s Plastics the Fast Facts 2025. The report puts 2024 global plastics production at about 430.9 million tonnes and says Europe produced roughly 54.6 million tonnes, a modest recovery of 0.4% after a sharp decline in 2023. It also reports that circular plastics represented about 15.4% of European production in 2024. These figures describe a plastics industry, not a stand-alone market estimate for food packaging. [S1] [S2]
Related analysis: the scope of EU packaging-waste statistics.
For packaging manufacturers and brand owners, the relevant question is what a declining European production share means for resin sourcing, recycled-content ambitions and industrial investment. The answer is more complicated than the claim that Europe is simply ‘running out of plastics’. Europe’s share can fall while its absolute production moves only slightly, if production elsewhere grows faster.
Read the production denominator before the market narrative
A production share is a fraction of global output. It is not the share of packaging consumed in European supermarkets, and it is not necessarily a measure of the region’s share of global finished packaging sales. The underlying report covers plastics of multiple uses, including construction, automotive, electrical and other industrial applications. Packaging is only one destination. [S1]
The scopes are not identical: the European 54.6-million-tonne total includes 2.9 million tonnes of mechanically recycled pre-consumer material, while the world regional-share comparison excludes that category because comparable data are unavailable elsewhere. Subtracting 2.9 from 54.6 and dividing by 430.9 gives approximately 12.0%, consistent with the reported share. Dividing the unadjusted European total by the global total would mix scopes. Europe here means EU27+3 (Norway, Switzerland and the United Kingdom); trade indicators below concern EU27. [S1]
| Indicator | Plastics Europe reported figure | Important boundary |
|---|---|---|
| Global plastics production, 2024 | About 430.9 million tonnes | All listed plastics uses, not packaging alone |
| Europe’s 2024 global share | Approximately 12% | Regional production share, not local consumption share |
| Europe’s 2006 global share | 22% | Historical comparator, different global market size |
| Europe’s 2024 production | About 54.6 million tonnes | EU27+3; includes pre-consumer recyclate, unlike the global share comparison |
| European circular plastics share, 2024 | About 15.4% | Report-defined circular feedstocks; excludes pre-consumer recyclate from the circular category, not from total European output |
| European plastics-sector turnover, 2024 | Approximately €398 billion | EU27+3 estimate based on 2022 structural data and later indices; not total packaging sales |
The numbers are reported by a trade association. Its policy commentary should be identified as advocacy even when the underlying production statistics are valuable.
Why declining share does not mean zero growth
A region can experience a shrinking share of world production without suffering the same percentage decline in its own physical output. The denominator matters. Plastics Europe’s figures show global production rose 4.1% in 2024, while European output was broadly stable. If the rest of the world expands more rapidly, Europe’s share falls even without a comparable drop in tonnes produced locally. [S1]
This is important because discussions of ‘lost market share’ often mix capacity, actual production and consumption. A plant can possess installed capacity but run below that rate. A region can import finished film or packaging despite operating domestic polymer plants. Packaging companies can substitute one resin grade or converting source for another. Each variable needs its own data.
The report’s longer-run fall from 22% to 12% is still significant for industrial strategy. It suggests global manufacturing has shifted toward other regions. But explaining the causes would require a more granular assessment of energy prices, trade, investment, technology, demand and policies. The report’s public headline alone does not establish which variable contributed what proportion of the change.
Circular production is not the same as packaging recycling
Plastics Europe says circular plastics reached 15.4% of European production in 2024 and had largely stagnated since 2022. That metric concerns the composition of plastic production under the association’s stated accounting approach. It is not evidence that 15.4% of European plastic packaging is collected, sorted or actually recycled. [S1]
This distinction matters to converters ordering recycled polymers. A recycler can supply material that is not suitable for every food-contact application. Material quality, contamination, processing history, approvals and traceability can constrain what a packaging producer can use. Conversely, an item containing recycled material is not necessarily itself recyclable in its intended end-of-life system.
The circular share also combines a specific set of production categories defined in the report. A useful procurement assessment must identify whether the product in question uses mechanically recycled, chemically recycled, bio-based or other feedstock classifications, rather than treating ‘circular’ as a universal technical specification.
In a packaging tender, the more defensible question is not ‘Does the supplier use circular plastic?’ It is ‘What percentage of this finished packaging construction is qualifying recycled content, on what basis, with what traceability and under which food-contact or destination-market rules?’

Europe’s industrial trade position adds another layer
Plastics Europe reports that the EU remained a net importer of plastics materials and products in 2024, describing a net import balance of about 1.6 million tonnes. This is a trade statistic, not proof of an identical import dependence for every resin or every finished packaging category. [S1]
For a packaging converter, relying on imports may be economically rational. It may secure material grades, price competition or geographic diversification. But concentration in one supply region can create exposure to shipping disruptions, exchange-rate changes and trade remedies. The risk is not intrinsically ‘imports are bad’. It is whether the business can maintain product performance and continuity under changes in supply conditions.
Procurement teams should therefore track the origin of resins and films, available substitute grades, customs classification, product qualification effort and actual landed cost. A nominally cheaper polymer may be more expensive once additional scrap, qualification delays and delivery variability are included.
What industry executives are arguing
Virginia Janssens, Managing Director of Plastics Europe, publicly connects the decline in manufacturing competitiveness to questions of industrial resilience and local production. That perspective is valuable as a signal of industry lobbying priorities and supply concerns. It does not, on its own, prove that a particular subsidy or regulatory change would improve packaging environmental outcomes. [S1]
A serious editorial analysis needs both sides of the industrial question. A healthy local resin sector can reduce some strategic dependencies. Yet a stronger production base should not be used to argue against verified product performance, credible recycled content or effective collection and reprocessing. For packaging, industrial competitiveness and circularity are linked challenges, not substitutes for each other.
Implications by packaging application
| Packaging application | Relevant exposure | Better evidence to request |
|---|---|---|
| Food-contact trays and containers | Grade availability and contact compliance | Resin origin, technical specification, test and declaration scope |
| Flexible films | Film structure and processing consistency | Barrier, sealability, qualified supplier alternatives |
| Recycled-content bottles | Availability of suitable recycled resin | Recycled-content calculation and quality traceability |
| Transport packaging | Performance and repeated use economics | Strength, return logistics, damage and repair rate |
| Paper-plastic composites | Coating/resin supply plus recycling routes | Layer construction and actual process compatibility |
The table identifies decision variables; it does not claim that any particular region or polymer produces a superior environmental outcome. That determination would require appropriate comparable evidence.
The danger of using market data to sell an environmental conclusion
A declining European production share is not evidence that plastics should always be replaced by paper or molded fiber. Material choices involve protective function, food waste, transport, pack weight, barrier performance and local end-of-life systems. A material-substitution decision should be made at the finished-packaging level.
Likewise, a circular production percentage is not a company-specific certification. It cannot establish the recycled content of an individual bottle, pouch or tray. Buyers need to trace general market trends down to a defined SKU before making environmental or compliance claims.
Editorial assessment: the next advantage is verifiable supply
The evidence supports a clear structural concern: Europe has lost share of global plastics production while its circular production share has stalled. The implication for packaging is not an automatic future shortage or a guaranteed price rise. It is that converters and brands need better visibility into polymer origin, grade availability, qualified alternatives and recycled-content evidence.
Future analysis should monitor updated production data, trade flows and the difference between material supply and actual packaging recovery. Treating these as separate indicators is more useful than making a single forecast from a politically salient percentage. [S1] [S2]
Sources / References
- [S1] Plastics Europe — Plastics the Fast Facts 2025, industry report page, 2025 edition using primarily 2024 observations. Public figures and executive commentary reviewed; production scope is broader than packaging. Full 2025 report PDF checked for production components, regional-share footnote and EU27 trade balance; the 54.6 Mt and 430.9 Mt totals use different pre-consumer scopes.
- [S2] Plastics Europe — European plastics industry at a cliff edge as competitiveness collapses, accompanying industry release, 2025. Reports Europe 54.6 million tonnes and related production context; association viewpoint, not independent policy assessment.
Found an error? Read our corrections policy and contact the editors.



