One inch equals exactly 2.54 centimeters. Multiply inches by 2.54 to get centimeters. The relationship is based on the exact international inch, 25.4 mm. Display rounding does not change that definition.
Formula and unit check
centimeters = inches × 2.54. Check that the input is a length, not an area or volume. A square-inch or cubic-inch conversion requires the factor to be squared or cubed; the linear chart below cannot be used unchanged.
Inches to CM Conversion Chart
| Inches (in) | Centimeters (cm) |
|---|---|
| 0.125 | 0.32 |
| 0.25 | 0.64 |
| 0.5 | 1.27 |
| 0.75 | 1.91 |
| 1 | 2.54 |
| 1.5 | 3.81 |
| 2 | 5.08 |
| 2.5 | 6.35 |
| 3 | 7.62 |
| 4 | 10.16 |
| 5 | 12.70 |
| 6 | 15.24 |
| 7 | 17.78 |
| 8 | 20.32 |
| 9 | 22.86 |
| 10 | 25.40 |
| 12 | 30.48 |
| 14 | 35.56 |
| 16 | 40.64 |
| 18 | 45.72 |
| 20 | 50.80 |
| 24 | 60.96 |
| 30 | 76.20 |
| 36 | 91.44 |
| 40 | 101.60 |
| 48 | 121.92 |
| 60 | 152.40 |
| 72 | 182.88 |
| 84 | 213.36 |
| 96 | 243.84 |
Convert fractional inches first
For 7½ in, write 7.5 × 2.54 = 19.05 cm. For ⅜ in, calculate 3 ÷ 8 = 0.375 in, then multiply by 2.54 to get exactly 0.9525 cm before display rounding. The fraction is part of an inch, not a decimal digit to append.
Separate feet, inches and decimal notation
A measurement of 5 ft 8 in is 5 × 12 + 8 = 68 in, or exactly 172.72 cm. The notation 5.8 ft means 5 plus eight tenths of a foot; it is not 5 ft 8 in. Resolve the original notation before multiplying.
A screen size stated in inches usually refers to a diagonal. Converting the diagonal to centimeters does not supply the screen’s width and height without its geometry. Keep the meaning of the original dimension attached to the converted number.
The reverse centimeters to inches chart starts with metric lengths. For fine dimensions, millimeters to inches explains why rounding to a nearby fraction can change a fit.
Common questions
How many centimeters are in ¼ inch?
Exactly 0.635 cm. That is 6.35 mm; keep those smaller units distinct.
Does converting a diagonal give the width?
No. The converted diagonal remains a diagonal. Width and height require additional dimensions or the shape’s aspect ratio.
Sources and calculation method
All chart results are calculated from the stated full factors, then rounded once to two decimal places using round-half-up. Trailing zeros show a consistent display, not the precision of a measuring tool.
- NIST — Handbook 44 (2026), Appendix C: General Tables of Units of Measurement. C-4, C-6, C-9, C-15–19 and C-25; exact definitions and explicitly rounded equivalents distinguished.
Found an error? Read our corrections policy and contact the editors.
