Skip to content
DegradablePackaging

News, Regulations, Materials & Market Intelligence

Publish
Tools & ConversionsAnalysis & reference

CM to Inches Conversion Chart and Formula

One centimeter is approximately 0.393701 inch. Divide centimeters by 2.54 to get inches.

cm to inches reference showing 10 cm equals 3.94 in, 30 cm equals 11.81 in, 100 cm equals 39.37 in.
Original calculated reference graphic by Degradable Packaging. Values rounded as labeled; the article tables supply the measurement-system context.
Sources checked
November 7, 2026

One centimeter is approximately 0.393701 inch. Divide centimeters by 2.54 to get inches. The relationship is based on the exact international inch, 25.4 mm. Display rounding does not change that definition.

Formula and unit check

inches = centimeters ÷ 2.54. Check that the input is a length, not an area or volume. A square-inch or cubic-inch conversion requires the factor to be squared or cubed; the linear chart below cannot be used unchanged.

CM to Inches Conversion Chart

Centimeters to inches
Centimeters (cm)Inches (in)
10.39
20.79
31.18
41.57
51.97
62.36
83.15
103.94
124.72
155.91
207.87
259.84
3011.81
3513.78
4015.75
4517.72
5019.69
6023.62
7027.56
8031.50
9035.43
10039.37
12047.24
14055.12
15059.06
16062.99
17066.93
18070.87
19074.80
20078.74

Convert a measurement from a tape

A 30 cm length is 30 ÷ 2.54 = approximately 11.81 in. It is close to a foot but not exactly a foot: 12 in is exactly 30.48 cm. The difference is 0.48 cm, or 4.8 mm. Retain the measured dimension when a fit matters.

Convert height without reading decimals as inches

For 170 cm, the result is approximately 66.9291 in. To express it in feet and inches, take 5 whole feet (60 in), leaving approximately 6.93 in: about 5 ft 6.93 in. A decimal-foot value is a different representation and should not be read as feet followed by inches.

For a rectangular object, convert each linear dimension separately. A 20 × 30 cm rectangle is approximately 7.87 × 11.81 in. Its area conversion cannot be obtained by dividing 600 cm² by 2.54 just once.

Use inches to centimeters for the reverse direction. Use millimeters to inches when the source gives a smaller dimension in mm.

Common questions

Is 2.5 cm exactly one inch?

No. One inch is exactly 2.54 cm. A 2.5 cm dimension is about 0.9843 in.

Can I convert a height directly into feet and inches?

First divide centimeters by 2.54 to obtain total inches. Divide that total into whole groups of 12 inches for feet, then keep the remaining inches.

Sources and calculation method

All chart results are calculated from the stated full factors, then rounded once to two decimal places using round-half-up. Trailing zeros show a consistent display, not the precision of a measuring tool.

  1. NIST — Handbook 44 (2026), Appendix C: General Tables of Units of Measurement. C-4, C-6, C-9, C-15–19 and C-25; exact definitions and explicitly rounded equivalents distinguished.

Found an error? Read our corrections policy and contact the editors.

Subscribe to Our Newsletter

Get the latest packaging regulations, materials, market trends and industry news.

Join the list for future updates. Privacy.